DAHO SPLICING NEEDLE 150 LB - 200 LB

The DaHo Hollow Spectra Threading Needles are hollow inside, except for the point, so monofilament or fluorocarbon line can be inserted into the needle. Then, the needle with the internal mono/fluoro line, is inserted, or threaded, into the hollow center section of the spectra braid. The needle, and attached mono/fluoro line, is typically inserted inside of the spectra from 3 to 5 feet to provide the best strength of the join. Because of the slick surface of the mono/fluoro line, the end point of the spectra must be finished to secure it to the mono/fluoro line. This finishing is usually done by gluing, serving,  crimping, or some combination of these attachments, to the spectra line end. This ensures the join will not slip before the compression pressure occurs in the braid of the hollow spectra line to hold the joined lines together.

The primary size of the threading needle is the ID, or Internal Diameter, indicating the approximate size of the mono/fluoro line that it will fit inside. The threading needle size you need is determined by the size of the mono/fluoro line you are using. The ID sizes of our threading needles can vary up to .002" due to the Stainless Steel Hypodermic tube manufacturing process. This is the standard acceptable size variance of the SS tubes we use to make our needles. As we receive new shipments of needles, the IDs may change up to this .002" size.  It is recommended that you select a needle that is at least .002" larger than your line for ease of use. It can also be difficult to fit an exact size of line into a needle. If you have a problem with your line not fitting into one of our needles, please send us an email and we will analyze and resolve the problem.